Product Description

Wilson Case Trimmers owners can easily add the new Sinclair Micrometer Attachment to their case trimmer. The micrometer has clear, crisp engravings, and can be locked in place after being set. Adjustable in increments of .001inch and can be adjusted to handle cases ranging from 22 Hornet to 416 Rigby. Great addition for those handloaders switching back and forth between different trim lengths.

Sinclair Platform

The idea for this platform originated from a writer/customer of ours. The platform is a mounting board for the Wilson trimmer series that provides storage space for nine (9) case holders and a tapping block for knocking the cases out of the holder. The polyethylene platform has rubber feet, but most of us prefer it c-clamped to the bench.

Wilson Micrometer Stop

Upgrade your standard Case Trimmer with a New Stainless long lasting finish with Micrometer adjustmen

Bolts on to your Regular Wilson Case Trimmer

Larger stop screw adjustment from 3/8″ (old)  to 1/2″ (new) with increased width on Stop Nut.  Makes for a firm stop. Coated with black oxide for a long lasting durable finish.Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer

Made in the U.S.A. with American Steel

Case Holder Clamp

Case Holder Clamp is and alternative to holding the case holder down with your hand. All you need to do is set the Case Holder on the rails of the trimmer and then swing the clamp over the top. There is an adjustment on top of the clamp to increase or decrease pressure. Coated with a Bright Nickel Finish.

Wilson Case Trimmer Stand

An alternative to mounting the trimmer in a vise. The Trimmer stand is available in the Regular and the 50 caliber versions. Can be clamped or mounted to bench with screws.

Regular Carbide Cutter

Machines to the same cutting angle and rake as out standard, but the last 3/8ths of the cutter is machined out of carbide.

Stainless Steel Crank Handle

Upgrade your current handle to the new stainless version.

Primer Pocket Reamer

Used in conjunction with our case trimmer, to remove the primer crimp on military cases. Please specify large (.210) or small (.175)

Uniform Deburring Tool 30 or 40 degree

We produce two case neck deburring tools to be used with the trimmers. They will both mount inside the cutter housing and each includes a crank style handle.

Additional Information